HOUSESAID YD-1312A ESPRESSO MACHINE

1. Specifications

• Power: 1100 W
• Pump pressure: 20 bar
• Water tank: 1.6 L, removable
• Functions: espresso (1/2 cups), steam for milk, hot water
• Safety: overheat and overpressure protection

2. First use

1. Fill the tank with cold water up to MAX and attach it.
2. Turn the steam knob to 0.
3. Turn on the appliance and wait until all lights remain steady.
4. Place a container under the steam nozzle.
5. Open the steam knob and let the water run for a few seconds.
6. Turn the knob back to 0.

3. Brewing espresso

1. Turn on the appliance and wait for it to heat up.
2. Choose the filter for 1 or 2 cups and add the ground coffee.
3. Press the coffee and lock the portafilter into place.
4. Place the cup under the portafilter.
5. Press the button for 1 cup or 2 cups.

4. Frothing milk

1. Press the Steam button and wait for it to heat up.
2. Insert the nozzle into cold milk.
3. Gradually open the side steam knob.
4. After frothing, close the knob to 0 and turn off the Steam function.

5. Hot water

In standby, open the side steam knob to release hot water. To stop, return to 0.

6. Cleaning and descaling

• After use, wash the tank, filters, portafilter, and drip tray.
• Wipe the steam nozzle immediately after using milk.
• For descaling, use a specialized solution according to its instructions and then rinse thoroughly with clean water.

7. Common issues

• Buttons are flashing: the appliance is heating up or the steam knob is not in the 0 position.
• Coffee does not flow: the appliance may be too hot after using the steam function; release water through the nozzle until the temperature drops.
• All lights flash 5 times: descaling is required. To reset, while in standby, press and hold 1 cup + 2 cups + Steam for 3 seconds simultaneously.
• The appliance turns off by itself: it enters Sleep mode after approximately 29 minutes.

Caution: Do not submerge the appliance or electrical components in water and unplug it before cleaning. Do not open the tank while brewing coffee.